More A7 questions

**DSauro** · September 21st, 2011, 08:17 PM

Thanks for the great photos. I thought the color of VolvoHeretic's 416-8A might be close enough to the Heathkit color to take a closer look. Lighting is everything. It still looks a little closer to the Heathkit grey color than an Altec green repaint to my old eyes (IMHO).

**VolvoHeretic** · September 21st, 2011, 08:38 PM

OK, I will call them grey also.

**DSauro** · September 21st, 2011, 08:42 PM

Originally Posted by VolvoHeretic

OK, I will call them grey also.

No, They belong to you, and I will call them green.

**voice of the theater** · September 21st, 2011, 08:54 PM

To my eyes, yours look a little greener than my grey drivers, but no where near as green as my "Altec green" drivers. As Dave said, lighting could be a factor. I can tell you that my grey drivers looked as grey in person as they do in the photos--there was absolutely not even a hint of green to them in person--just like in the photos. I'm assuming since you've been referring to your drivers as green they do have the greenish hue (in person) that I can see in your photo. If that's the case, then your 416's are not the same color as my grey drivers or as my "Altec green" drivers. Hmmmm........

**VolvoHeretic** · September 21st, 2011, 09:03 PM

OK, wifey called them teal green, (but I say with a tint of grey) so call me confused.

**DSauro** · September 21st, 2011, 09:09 PM

Originally Posted by VolvoHeretic

OK, wifey called them teal green, (but I say with a tint of grey) so call me confused.

Sort of "Heathtec Grayne"

**VolvoHeretic** · September 21st, 2011, 09:18 PM

Wife says, "I agree" (edit; the gray/green of my photos is also accurate. WTF, calling all of the Altec history pros.

?)

**VolvoHeretic** · October 1st, 2011, 01:33 AM

So, Nobody has a comment on a crossover frequency for my 8 piezos? How about 8000hz, 10000hz? I just discovered that I'm deaf above 12000hz.

**Panomaniac** · October 1st, 2011, 09:00 AM

I must have missed the question. If you run those piezos hot enough, you may find that you can hear above 12KHz - for awhile.

8K is what would work on my horns.

**VolvoHeretic** · October 1st, 2011, 01:27 PM

Ok, the first online crossover calculator I picked says that for an 8ohm load and 8000hz high pass filter, I need a 2.48687 uf capacitor. It's a capacitor I need right, I'm pretty ignorant? Parts express Solans has a 1.5 and 1.0, so wire these in parallel and then also in parallel to all of the piezos? Since these tweeters don't seem to register as having any ohm resistance consiquence (what's that mean, they have infinite resistance?), how do I pick the capacitor?